<p>What is the strength of GPS signal at MIT campus?
How many sattelites can simple device, like Garmin eTrex, track?</p>
<p>There are certain benchmarks in the city where you get precise signals from the satellites. But generally on the campus, you won’t get a proper signal if some building/tree/something comes in the way. You have to be outdoors in some open areas.</p>
<p>To get a reading, the GPS reciever should lock into atleast 3 satellites. If it does that, you will know the the latitude and the longitude (your location in 2D) and if it can manage to lock into 4 satellites, you can find out the altitude too along with the latitude and longitude (3D).</p>
<p>I know how the GPS works… But in some area there is better or worse signal…</p>
<p>You’ll know when you get there… really not much you can do beforehand. :)</p>
<p>i suppose it would be silly to ask why you’re wondering?</p>
<p>Stalking++.</p>
<p>hehe
I am just wondering whether there are quality differences between areas.
Additionally better signal means better accuracy, which would help in Grand Challenge tests ;).</p>
<p>I think there is difference in quality between different areas. For example - I know for sure that WAAS signals are more accurate in Seattle, WA (USA) than in Vancouver, BC (Canada).</p>
<p>Also another thing - GPS signals can’t pass through solid objects.</p>
<p>Yes. Measurement should be made with the view to the clean sky.
I am wondering because I got better signal in the more underdeveloped region of country, where live less people, than in capital. </p>
<p>I guess it might be due to abundance of resonating sets, or interfering signal. Are the sattelites spread equally around the globe?
Hence I wonder how it would be at MIT where is wireless internet for example… Which is 2,45 Ghz, comparing to 1,575 Ghz of GPS [Am I right?].</p>
<p>Well, in the city, because of so many buildings, the signal might be getting reflected off many times before finally reaching your reciever. Also the more satellites your reciever can lock into, the better accuracy you get. As far as electronic interference is concerned, I am not too sure about it. I’ve heard radio frequency signals are most susceptable to interference with the GPS signals, which operate in the L band. Other signals such as those from cellphones and wireless internet don’t do much harm. But again, I am not sure. It’s interesting, I’ll think about it and get back.</p>
<p>Also, the accuracy depends a whole lot on the design of your GPS receiver. Interference with the GPS signal decreases the signal to noise ratio and that can prevent the receiver from taking accurate measurements. </p>
<p>Yeah, satellites are all equally spaced. There are 6 orbital planes around the earth with 4 satellites in each plane 60 degrees apart.</p>
<p>I thought that accuracy of clock is more important for accuracy of measurment ;). </p>
<p>Hmm. The small strength of signals/interference can give errors though, and hence give erroneus positions - false signals.</p>
<p>ok. Enough. :)</p>
<p>
The accuracy of the onboard clock on the receiver is not that important for most sets, cuz they use the clocking signals (delays) from two or more GPS satellites to do the matching and time-correction… because the satellites contain precise atomic clocks which the handheld receivers can’t.
I thought this was the only place you could talk nerdy and not be frowned at :p</p>