Violin Help!!

<p>On Saturday I changed my strings with a new set, but I took 3 strings off so the pressure on the sound post was way loosened. Today, I was tuning during chamber and suddenly I hear loud boom from my violin. The bridge poped off and the strings were still intact. A few minutes later, the first chair person found that my sound post came off as well. Is it possible to reposition the soundpost without opening the violin? If the violin is opened, the tone might be different. Keep in mind, this is a 4000 dollar instrucment.</p>

<p>Yeah it is possible, but there is A) a lot of luck involved and B) a lot of skill involved so you have to take it to the right person. I’ve heard of it happening, but its never happened to me, so I don’t have much first hand experience.</p>

<p>Lets say a professional/repair person and violinmaker., that would do right?</p>

<p>You need to contact a luthier; preferrably one with much experiece. Yes, the soundpost can be adjusted without the violin being seperated. It can be done, but must be done by a hand of expertise. Usually, the luthier will go ahead and give you a full setup and rearrange your bridge. You must be careful; while you are tuning, always check the alignment and angle of your bridge - if it is leaning too far forward, it will collapse soon and needs to be readjusted.</p>

<p>Chaostheory, I don’t think you understand completely. The sound post fell off because of release of tension since I was changing the set of strings. Your suppose to take one off at a time and change anymore then 2 strings will cause the soundpost to get loosened. I took off 3 strings because I didn’t know at the time, this sucks.</p>

<p>How much would this be?</p>

<p>My parents might kill me because of this.</p>

<p>Ah, I see. I am not that experienced on the matter of violin repair, however I will say that this may be the result of a badly adjusted soundpost to begin with. Soundposts shouldn’t collapse due to the change in tension of releasing and resetting violin strings - usually, the difference in tension is subtle. Of course, pressure is applied and realeased on the soundpost, but it shouldn’t collapse. It shouldn’t cost in excess of $100, but the situation depends. In your case, I would estimate about $60 - 80 at a good luthier. Also, you may want to consider reshaping the bridge to more evenly distribute the tension.</p>

<p>Hope this helps :slight_smile:
By the way, what brand strings do you use?</p>

<p>No, it happens when you take off all four strings. Searh Johnson string instruments, shar, southwest, etc. or other circumstances. It’s because wood bends. It happens and sometimes it doesn’t. the bending of the wood costs this.</p>

<p>Hooray for wind instruments! Clarinets rock!</p>

<p>I would recommend taking the violin to an expert to repair the violin. He will not have to open up the top of the violin to reposition the soundpost. There is a tool that can be used to place the soundpost from the f-holes.</p>

<p>I do not think it should cost TOO much since the repairman isn’t doing anythign drastic to the violin…just setting the soundpost + bridge.</p>

<p>Hope it helps!</p>

<p>Take it to the best guy you can find. Don’t let someone screw up your instrument.</p>

<p>My instrument was screwed up to begin with - like me :D</p>

<p>The bridge does have the ability to be put back on without having to open the instrument. My guess is that when you put the new strings on, you must have moved the bridge, and the new pressure of strings on the brige caused it to do whatever it does. Believe me, i play the violin. Also, make sure it is straight. Every so often, you have to position it so it is still straight.</p>